Working principle:

Water spray gas purification tower is the main mode of operation into the exhaust gas purification tower by wind pipe, through the filler layer, exhaust gas and water two-phase full contact absorption, exhaust gas after purification, followed by dehydration defogging plate fog by the fan into the atmosphere. The pump pressure increase after spraying at the top of the tower and the tower at the end of the absorption liquid and finally return to the tower bottom cycle. The exhaust gas after purification reaches the emission standard of local emission standard, which is lower than the national emission standard. The following is the engineering process flow of waste gas treatment:waste gas→Inlet duct→Waste gas treatment tower→draught fan→flue pipe→Standard discharge.

The water spraying exhaust gas purifying tower is made of corrosion-resistant PP board material, the gas is sucked into the air inlet section by centrifugal fan, and then flows upward to the filling layer and contacts with the spraying liquid. According to the gas purification conditions and other indicators, you can install second levels of packing and spraying device to deal with the purification of the gas discharged through the demister.

The utility model is composed of a gas distributor, a filling bracket, a filler, a spraying device, an accessory and a water pump. High efficiency, strong corrosion proof, high strength, low noise, low power consumption, small volume, convenient disassembly and maintenance, lightweight and durable.

Scope of application:
Widely used in chemical, electronic, metallurgical, electroplating, textile (chemical fiber), food, machinery manufacturing and other industries in the process of emissions of acid, alkaline waste gas purification. Such as seasoning food, acid making, pickling, electroplating, electrolysis, storage battery, etc

Technical characteristics:
1 • simple management and operation and maintenance are very convenient and concise and will not have any impact on the production of the workshop;
2 - low pressure drop, high operating flexibility, and has good performance in fog; widely used in chemical industry, electronics, metallurgy, electroplating, textile (chemical fiber), food, machinery manufacturing and other industries in the process of emissions of acid and alkaline waste gas purification treatment. Such as seasoning food, acid making, pickling, electroplating, electrolysis, storage battery, etc.

Purification tower technical parameters

 Technical parameters of cyclone tower